Used CAT 310 Excavator For Sale in 2023: The Ultimate Guide

Used CAT 310 Excavator For Sale in 2023: The Ultimate Guide

The CAT 310 excavator is a high-performance machine that can be used for a variety of digging applications. The 310 excavator is equipped with a cab that has air conditioning, heating, and audio-visual systems to make the operator more comfortable while on the job site. The CAT 310 has onboard diagnostics that allow you to check engine functions quickly and efficiently.

 

 

What are the specs on a 310 CAT excavator?

CAT 310 excavator specs

The Caterpillar 310 excavator is a medium-sized model, with a capacity of 310 cubic feet. This makes it suitable for medium-sized jobs in construction sites and industrial areas. The maximum digging depth that this machine can reach is 19 feet (5.8 m), which can be accomplished with its 36 inches (91 cm) dipper stick extension.

The machine weighs around 20 tons, meaning it needs a lot of power to operate smoothly and efficiently. This is why the Caterpillar 310 comes with an engine type known as ACERT II™, which provides up to 500 hp of output power while still being environmentally friendly and reliable enough to last long hours on-site without needing repairs or maintenance checks regularly during operation timeframes.

 

 

What is the lifting capacity of a CAT 310 excavator?

CAT 310 excavator lifting capacity

The lifting capacity of a CAT 310 excavator is up to 6,000 pounds. This is dependent on the bucket size, boom length, and angle of operation. For example:

• A bucket with a 3 cubic yard capacity requires the machine to be at a 45-degree angle in order to lift it. If you are using the bucket at an angle less than this, then capacity will be reduced accordingly. In other words – if you need more weight capacity than what your machine’s maximum lifting capacity is (6k), then don’t use that big of a bucket!
• Longer booms will allow for higher lifts or greater reach from ground level AND longer booms can help reduce the minimum height required for any given lift (i.e., make it easier for those who do not want their tractor seat height too high).

 

 

How much does a CAT 310 excavator weight?

CAT 310 excavator weight

The weight of a CAT 310 excavator varies according to the engine size, fuel type, fuel tank size, and cab size. For example, the base model weighs 16.5 tons (18 metric tonnes) but can be increased by 1 ton to a total of 17.5 tons (19 metric tonnes).

The following table shows how much the machine weights:

• Engine
• 6-cylinder turbocharged with LPG 824 cc or 998 cc engines weigh 17.5 tons (19 metric tonnes)
• 4 cylinder naturally aspirated diesel engine produces 16.5 t/m (18 mts)

 

 

What is the size of the CAT excavator bucket?

CAT 310 excavator bucket

The CAT 310 excavator bucket capacity is 1.3 cubic yards and the bucket width is 4.1 feet. The bucket height is 5.2 feet, which makes it possible for the machine to dig deeper with a larger payload of materials in one load, making it more efficient than other brands on the market today.

 

 

Where are the CAT 310 excavators used?

CAT 310 excavator application

The CAT 310 excavator is used in many industries, including:

• Mining. The CAT 310 excavator can be used to dig up ore and other minerals from the earth.
• Construction. This could be anything from building homes, factories, and roads to digging trenches or laying pipes so they can be below ground level while still being able to move water or electricity through them.
• Utility companies use these machines to repair power lines and build new ones when they need to extend service into an area that didn’t have it before.
• Forestry workers use them to chop down trees and haul away large pieces of wood that are too heavy for people with chainsaws alone (or even for small tractors). The CAT 310 also helps clear land before planting crops; instead of using heavy equipment like bulldozers or backhoes all day long every day throughout their whole lives doing just one task over again every time there’s something else needs doing!

 

 

How much does a CAT 310 excavator cost?

CAT 310 excavator price

The price of a new CAT 310 excavator can be anywhere from $60,000 to $100,000. The cost of a used machine will vary depending on its condition and hours of use. A well-maintained unit may cost more than one that has been neglected in storage but it’s still worth shopping around for a good deal.

For parts and accessories, you’ll pay about $3,000 for each hour of operation on the machine. If you need repairs or replacement parts for your CAT 310 excavator, there are plenty available through third-party suppliers at varying prices depending on what exactly needs fixing.

 

 

Conclusion

The CAT 310 excavator is a great choice for anyone looking to get into the construction industry. It’s powerful, compact, and easy to operate. If you want more information on how much it costs or where you can buy one of these machines then please contact us today +0086 186-2391-5479!

 

Choosing CAT 305 Excavator in 2023: 6 problems You Need to Know

Choosing CAT 305 Excavator in 2023: 6 problems You Need to Know

The CAT 305 excavator is another great machine in Caterpillar’s line-up of powerful machines. It features a direct drive system that makes it highly efficient and easy to use. The CAT 305 excavator has a high lifting capacity, making it ideal for moving large volumes of material over long distances. The machine works well in construction sites where it can be used to dig foundations and trenches, as well as on farms where it can move dirt from fields.

 

 

What are the CAT 305 excavator specs?

Cat 305 cr specs

The CAT 305 excavator specifications are as follows:

• Length: 7.3 m (24 ft 9 in)
• Width: 3.2 m (10 ft 5 in)
• Height: 3.7 m (12 ft 1 in)
• The power of the CAT305 is a 320 hp diesel engine.
• The fuel tank capacity is 675 L (180 US gal).

 

 

How big is a CAT 305 excavator?

Weight of cat 305 excavator

The CAT 305 excavator is a heavy-duty machine that can handle all kinds of jobs, from digging foundations for houses to building huge buildings.

It has a maximum digging reach of 12.5m (41ft), which means it can place the bucket at a distance of 41 feet away from the front end. It also has a maximum digging depth of 6.1m (20ft) and a maximum digging width of 3.5m (11ft).

 

 

How much does a CAT 305 mini excavator weight?

Cat 305 excavator weight

The Caterpillar 305 excavator weighs in at 15,500 pounds (about 7 metric tonnes) with the operator’s cab and auxiliary equipment. The CAT 305 mini excavator is a compact machine with a weight of just 5.3 tons and a max breakout force of 343kN.

The real weight of the machine will depend on the configuration chosen by the customer, as well as its accessories, tooling, and fuel load. The maximum lifting capacity of this model is 12,000 pounds (5 metric tonnes), which is equivalent to a medium-sized car or SUV on flat ground. For example, an operator-ready CAT 305 mini excavator weighs approximately 6300 pounds (2900 kg).

 

 

What are the CAT 305 excavator attachments?

Cat 305 excavator bucket

• Cab
• Hydraulic boom
• Hydraulic arm
• Bucket
• Shear pin
• Axial piston pump
• Pump oil cooler
• Hydrostatic filter (HDF)
• Hydraulic filter (HF)
• Hydraulic cooler(HC)

 

 

 

How to start a CAT 305 excavator?

Cat 305 excavator for sale

• Check the fuel level in the tank.
• Check the hydraulic oil level of the machine and add if required.
• Check the oil filter, if any leakage is seen replace it immediately by following the proper procedure.
• Make sure that the battery charge is sufficient to start CAT 305 excavator engine and run for some time, otherwise recharge it before starting it up again.
• Inflate tires to the recommended pressure for good performance and traction on different surfaces like hard ground surface, mud, etc., which may not be flat or even at times unevenly distributed across an excavation site. This will help you achieve better stability while working with heavy equipment like a backhoe excavator machine as well as prevent tire punctures from occurring due to excessive wear & tear on soft surfaces such as sand/soil-prone areas when operating in such conditions with weak ground stability caused due.

 

 

How much does a CAT 305 excavator cost?

Cat 305 excavator price

The cost of a CAT 305 excavator depends on a number of factors, including what you’re looking for and where you’re buying it. If you’d like to buy one new, expect to pay between $50,000 and $80,000. Used excavators can be found in the range of $28,000 up to $56,000 depending on their age and condition.

While this is an expensive piece of machinery that requires careful maintenance over time and regular upgrades as technology improves (about every five years), the investment will pay off when it comes time for repairs or replacement parts such as hydraulic hoses or hydraulic pumps.

If you’re looking for an affordable option that’s still reliable and high quality then buying second-hand could work well for you. If you’re looking into buying either type then remember to consider things like:

• Value – What’s the resale value? How much will this impact my investment?
• Performance – How can I maximize my productivity?

 

 

Conclusion

The Cat 305 excavator offers a range of features and benefits: it has a strong engine that can handle tough jobs, and its compact design makes it easy to operate. This model is ideal for contractors who need something they can rely on every day. If you want to know more about cat 305 excavator, please contact us at +0086 186-2391-5479.

 

Choose The Affordable Cat 308 Excavator: Step by Step Guide

Choose The Affordable Cat 308 Excavator: Step by Step Guide

The Cat 308 excavator is an industrial-grade machine designed to operate efficiently in demanding conditions. It’s also a favorite among many contractors who use it to dig and maneuver earth, rock, and other materials. The hydraulic and electric systems on this machine have been designed for excellent performance under all conditions, including heavy loads and continuous operation over long periods of time.

 

 

How to start a CAT 308 excavator?

How to operate a cat 308 excavator

• Turn on the fuel
• Turn on the ignition switch
• Turn on the hydraulic oil
• Turn on the water supply valve of the coolant, oil, and liquid cylinder to supply coolant, oil, and water respectively
• Check whether there is any leakage in each part before starting up according to relevant instructions provided by the manufacturer (if necessary)

 

 

What are the specs on a 308 CAT excavator?

Cat 308 excavator specs

The Cat 308 excavator’s standard features include a full-steel cab, an operating weight of 132,000 pounds, and an engine rated at 480 horsepower. The machine’s maximum digging depth is 27 feet 2 inches, while its arms reach is 59 feet 1 inch.

The machine comes with a mechanical traveling system (tracks) rated at 14 MPH and a hydraulic travel speed (pads) of 7 MPH. It also has an operating weight of 132,000 pounds as well as an engine rating of 480 horsepower. Its maximum digging depth is 27 feet 2 inches while its arm’s reach exceeds 59 feet 1 inch.

 

 

How much does a CAT 308 excavator weight?

Cat 308 excavator weight

The total weight of your Cat 308 excavator should be between 10,000 lbs and 14,000 lbs depending on what model you get. This includes all attachments such as: bucket forks, buckets, rippers, and more! If your machine weighs less than 5 tons then it will be considered an SAE Class 3-5 vehicle (less than 18 wheels). These types tend towards being lighter because they do not need heavy duty components such as axles or frames; however these types are still rated at 6 MPH which means they are perfect for construction sites where there aren’t many obstacles like dirt hills etcetera.

 

 

How many HP is a CAT 308 excavator?

Cat 308 excavator lifting capacity

This model has a power of 200 HP and can be used for medium excavations. It is a compact machine, which means it has a smaller frame than other models that are available on the market. The unit weighs about 24 tons and measures 10,000 mm in length, 3200 mm in width, and 3100 mm in height.

The Cat 308 excavator is an excellent choice for those who need to complete small projects or tasks and don’t want to spend a lot of money on their equipment.

 

 

What are the CAT 308 excavator attachments?

Cat 308 excavator buckets

The Cat 308 excavator is a versatile machine that can be equipped with several attachments to suit your needs.

• Bucket: The bucket is one of the most popular attachments for this machine and can be used as an excavator, mixer, or even as a digger scoop. Its design allows it to be used in many different applications.
• Grapple: The grapple attachment is designed to lift materials like stones and rocks during construction projects. It has a large amount of lifting capacity that helps with transporting materials from one place to another quickly and efficiently.
• Hoist: The hoist attachment helps lift heavy objects using a crane-type assembly known as an A-frame, which consists of two parts on opposite sides of the armature shaft from which both ends are connected by wire rope cables (tensile strength).

 

 

How much does a used CAT 308 excavator cost?

Used cat 308 excavator for sale

The price of the machine depends on its age, condition, and location. If you are looking for a used cat 308 excavator with under one year of operation, then it may cost anywhere between $16,000 and $38,000. The older the machine becomes, the cheaper it is. Similarly, if you want to buy a new cat 308 excavator then it will cost more than what an old one costs as they are more expensive than their earlier counterparts.

If you’re happy to trade higher mileage for lower prices, you can find machines with asking prices as low as $10,000.

 

 

Conclusion

The cat 308 excavator is a great machine to own. It has a lot of power and can do the job you need it to. The only downside is that they are expensive but if you are looking for something that will last forever then this might be the machine for you! If you want to know more about cat 308 excavator, please contact us at +0086 186-2391-5479.