2023 CAT 315 Excavator For Sale: The Complete Guide
The CAT 315 excavator is a robust, reliable, and powerful machine. Its low center of gravity makes it ideal for use in tight conditions. The large cabin provides maximum visibility, allowing the operator to easily see all around them. The CAT 315 has a long reach and can dig deeper than most other machines in its class. It also comes with an efficient hydraulic system that can lift up to 66 tonnes vertically at just 30 meters per minute!
What are the CAT 315 excavator specs?
315 Cat excavator specs
- Cat 315 excavator specifications:
- Dimensions—length: 16.5 ft; width: 13 ft; height: 11.5 ft; weight (empty): 29,000 lbs; weight (maximum load): 60,000 lbs.
- Thumb length—19 inches wide x 5 inches deep x 8 inches high.
- Thumb width—20 inches in diameter at the base and 7 inches in diameter at the top edge of the bucket teeth.
How much can a 315 CAT excavator lift?
Cat 315 excavator lifting capacity
The Cat 315 excavator is capable of lifting and moving large amounts of material. This can be done with the use of a bucket, with a boom, or both.
- The maximum allowable weight for this machine is 39,000 pounds. If you are using your Cat to move or lift material that weighs less than 39,000 pounds, it should not be an issue for your model’s capabilities.
- The bucket’s capacity ranges between 8-27 cubic yards depending on what size load you need to accomplish.
- Your booms are rated at 12-40 cubic yards per one-inch diameter pipeline (this means if you have 1” pipe lines then they can handle up to 80 cubic yards).
How much does a CAT 315 excavator weight?
315 Cat excavator weight
The Cat 315 excavator is a medium-sized excavator that weighs about 18,000 pounds. The weight of the machine will vary depending on whether it has a bucket or boom attached. If you are looking for more specifics, here are some of the key specs:
- Weight with bucket – 22,550 lbs
- Weight without bucket – 17,564 lbs
What are the dimensions of the CAT 315 excavator thumb?
315 Cat excavator thumb
The Caterpillar 315 excavator is a machine used in construction and mining to move, lift, and place materials. It’s made up of a telescopic boom that extends from the chassis to lift loads and an engine at the rear of the machine that provides power for moving heavy objects. Below are some dimensions:
- Length – 7 feet (2.13 meters)
- Width – 3 feet (0.91 meters)
- Height – 1.5 feet (0.46 meters)
- Thickness – 2 inches
How to operate a CAT 315 excavator?
Cat 315 excavator control pattern
- Press the button, make sure the stop indicator is turned off, and then press the START/STOP switch to start or stop your machine.
- After you’ve started your machine, move it forward slowly until you feel it digging into dirt or sand. Then apply a little more pressure by moving forward more quickly as you pull back on the joystick towards yourself (this causes weight transfer). The faster you go, the quicker your bucket will lift up out of its starting position; once it’s in motion, let go of that joystick and gently bring it back down until all four tires touch the ground again – now they’re ready for another load!
- To slow down while turning corners without stalling at an intersection where traffic lights stand still but pedestrians must cross safely through both directions? Simply release all pressure off accelerator levers until all four tires touch ground again – this way no one gets hurt!
Get FREE Excavator Quotes
- ✔Get FREE Local Excavator Quotes Today
- ✔Compare The Best Prices
- ✔Save Money On Your Excavator Today!
How much is the CAT 315 excavator?
Cat 315 excavator price
The CAT 315 excavator is a mid-sized machine that costs between $45,000 and $70,000 new. The new price includes the machine itself, its attachments, and all necessary safety equipment. But used CAT 315 excavators are more affordable. If you don’t mind buying an older model that’s been fully serviced and reconditioned by a professional mechanic, you can find them for around $25,000.
If you are looking for a used Caterpillar 315 excavator, there are several things to consider. The first is the model year. Newer models will likely be more expensive than older ones. The second factor is the condition of the machine itself. A rusty or beat-up machine can be less expensive than a well-maintained one but may need parts replaced sooner than later due to its age and wear and tear on it. Finally, make sure you know what kind of modifications were made to your particular model before buying it so that you can get an accurate price quote from sellers.
The CAT 315 excavator is a great machine that can be used for many different things. The machine was made in order to help people with their daily tasks, whether it is digging or lifting up heavy items. If you want to know more about cat 315 excavator, please contact us at +0086 186-2391-5479.